Home > Driver for 2phase hybrid stepper motor >

Stepper Motor Driver JB2811M AC40-110V 8.0A 200Microstep

Product Categories

AC Servo motor [32]
Closed loop stepper motor [12]
Geared motor [17]
Brushless DC motor [31]
Dual shaft stepper motor [9]
Motor with brake [34]
2phase hybrid stepper motor [189]
3phase hybrid stepper motor [119]
Driver for 2phase hybrid stepper motor [13]
Driver for 3phase hybrid stepper motor [6]
AC servo motor driver [2]
SANYO DENKI [40]
Embroidery machine motor [1]

Shenzhen Jingbo Mechanical & Electrical CO.,Ltd

Contact Now

Stepper Motor Driver JB2811M AC40-110V 8.0A 200Microstep

Ask Lasest Price
Brand Name :	Jingbo
Model Number :	JB2811M
Certification :	CE
Delivery Time :	in stock
Payment Terms :	T/T, Paypal, Western Union
Supply Ability :	500pcs per week

Add to Cart

Product Details
Company Profile

Stepper Motor Driver JB2811M AC40-110V 8.0A 200Microstep

Stepper Motor Driver JB2811M AC40-110V 8.0A 200Microstep

Features

High performance, low price

16 channels constant angle and constant torque microstep, max revolution is up to 40,000 pulse/R

Upmost response frequency amounts to 200Kpps

Once the pulse stops over 1.5s, the phase current will be automatically reduced to half of pre-set current

Opto-isolated signal Input/Output

Driving current can be adjusted from 0.5A/phase to 8.0A/phase through 16 channels

Single power input, voltage range: AC40-110V

It can match 2 phase hybrid stepper motors whose current is under 8.0A, flange size ranges from 57mm to 110mm.

Phase memory function (Note: Once the input stops over 3 seconds, the driver will memorize the motor phase automatically so that it can restore the phase automatically when it is repowered or MF signals change from low level to high level.)

Wiring example

Stepper Motor Driver JB2811M AC40-110V 8.0A 200Microstep

Current setting

The working current of the driver is set by D1-D4 terminal, for more details please refer to the diagram below .

Current (A)	0.5	1.0	1.5	2.0	2.5	3.0	3.5	4.0
D1	OFF	OFF	OFF	OFF	OFF	OFF	OFF	OFF
D2	OFF	OFF	OFF	OFF	ON	ON	ON	ON
D3	OFF	OFF	ON	ON	OFF	OFF	ON	ON
D4	OFF	ON	OFF	ON	OFF	ON	OFF	ON
Current (A)	4.5	5.0	5.5	6.0	6.5	7.0	7.5	8.0
D1	ON	ON	ON	ON	ON	ON	ON	ON
D2	OFF	OFF	OFF	OFF	ON	ON	ON	ON
D3	OFF	OFF	ON	ON	OFF	OFF	ON	ON
D4	OFF	ON	OFF	ON	OFF	ON	OFF	ON

Microstep setting

The microsteps of the driver are set by D5-D8 terminal with the following 16 channels. The D9 and D10 are for function setting.

Details are as below: Microsteps(pulse/R)

Microstep	200	400	800	1000	1600	2000	3200	4000
D5	ON	ON	ON	ON	ON	ON	ON	ON
D6	ON	ON	ON	ON	OFF	OFF	OFF	OFF
D7	ON	ON	OFF	OFF	ON	ON	OFF	OFF
D8	ON	OFF	ON	OFF	ON	OFF	ON	OFF
Microstep	5000	6400	8000	10000	12800	16000	20000	40000
D5	OFF	OFF	OFF	OFF	OFF	OFF	OFF	OFF
D6	ON	ON	ON	ON	OFF	OFF	OFF	OFF
D7	ON	ON	OFF	OFF	ON	ON	OFF	OFF
D8	ON	OFF	ON	OFF	ON	OFF	ON	OFF
D9	ON, Double pulse: PU is Clockwise pulse signal, DR is counterclockwise pulse signal
D9	OFF, single pulse: PU is step pulse signal, DR is direction signal
D10	Self detect switch (OFF: accept external signal, ON: the driver is running at 30R/M internal)

Note: The microsteps can be customized according to clients’ requirement.

Terminal function

Port	Pin No	Mark	Function	Notes
DB15	1	PU+(5V)	Step pulse signal+	It can connect +5V or +24V, but an extra resistor is needed if it connect +24V
	2	PU-	DP9=OFF, PU is pulse signal	Effects on falling edge, the motor goes one step as the pulse input change from “high” to “low”. Input resistance is 220Ω. Requirement: low voltage:0-0.5V, high voltage: >4V, pulse width >2.5μs
	2	PU-	DP9=ON, PU is clockwise pulse signal
	3	DR+(5V)	Direction control signal+	It can connect +5V or +24V, but an extra resistor is needed if it connect +24V
	4	DR-	DP9=OFF, DR is direction control signal	Change motor’s direction of rotation. Input resistance is 220Ω. Requirement: low voltage:0-0.5V, high voltage: >4V, pulse width >2.5μs
	4	DR-	DP9=ON, DR is counterclockwise pulse signal
	7	MF+(5V)	Motor Free signal+	It can connect +5V or +24V, but an extra resistor is needed if it connect +24V
	8	MF-	Motor Free signal-	Once effects, it will cut off the motor current, the driver stops working and sets the motor free
	9	ALM+	Opto-isolated positive of driver fault output signal	The driver is overcurrent or overheat, it will output fault signal and the signal is valid(low voltage)
	10	ALM-	Opto-isolated negative of driver fault output signal
	11	RDY+	Opto-isolated positive of driver ready output signal	The driver is at normal state, and ready to accept control signal from controller and the signal is valid(low voltage)
	12	RDY-	Opto-isolated negative of driver ready output signal
	13	PU+(24V)	Step pulse signal+	It can connect +24V pulse signal power supply
	14	DR+(24V)	Direction control signal+	It can connect +24V direction signal power supply
	15	MF+(24V)	Motor Free signal+	It can connect +24V motor free signal power supply
Motor, power port	1,2	L1,L2	Power supply	Power: AC40-110V
	3	A+	Connect to the motor
	4	A-
	5	B+
	6	B-

! Caution

1. The input voltage can not exceed AC110V.

2. Input control signal is 5V, current-limiting resistance should be connected when it is over 5V, this driver comes with a 24V signal interface

3. The input pulse signal effects on falling edge

4. ALM lights and the driver stops working when the driver temperature is over 80℃. Until the temperature falls to 50℃, it will restart to work after powered-up. The heat sink is needed when overheat occurs

5. ALM lights if it is short circuit, please check motor leads and eliminate other short faults, and then repower up to restore

6. ALM lights if the motor does not connect well with the driver, please check motor leads and repower up to restore

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen Jingbo Mechanical & Electrical CO.,Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!